MEP design and build in Meydan 

MEP design and build in Meydan: local context

Meydan is the master-planned area surrounding the Meydan racecourse between Al Khail Road and Ras Al Khor, developed largely since the 2010s. It includes villa and townhouse communities, mid- and high-rise residential, hotels and the racecourse grandstand, with new neighbourhoods still being delivered. Building quality expectations are high and much of the area is under active construction. Its proximity to Business Bay and Downtown makes it a sought-after address for new high-end residential schemes.

• New villa and townhouse clusters connect to community infrastructure that may be handed over in phases, so DEWA connection timing and temporary power for testing should be planned early.
• High-rise residential towers need domestic water pressure zoning with PRV stations, fire pump and tank sizing for height, and stair pressurisation coordinated with the smoke control strategy.
• Master developer design guidelines and NOCs typically precede Dubai Municipality and Civil Defence submissions, and may set rules for rooftop equipment visibility and screening.

Building types we serve in Meydan

For hotels and serviced apartments, the work concentrates on quiet guestroom fan coils, kitchen and laundry extract, hot-water generation at scale, BMS supervision and phased handover to the operator.

Scope of work

• Cooling and heating load calculations, ventilation rates, electrical load schedules, water demand and drainage fixture-unit calculations for authority and utility submission.
• Selection of the HVAC approach, whether district cooling connection, central chilled water, VRF or packaged units, based on loads, plot constraints and lifecycle cost.
• Procurement of equipment against the design intent, with submittals that keep selections inside the calculated duties rather than swapping in undersized alternatives.
• Installation, testing, commissioning and handover by the same organisation, closing the loop between design assumptions and measured performance.

Systems we install

• Ventilation, kitchen and car park extract, smoke management and stair pressurisation systems.
• Fire sprinklers, hydrants, hose reels and addressable fire alarm systems.

UAE site and climate challenges

• Air-cooled equipment loses capacity as condenser inlet air gets hotter, and roof plant often sees air several degrees above ambient. We derate selections for real roof conditions and space units to avoid hot-air recirculation.
• Solar gain through glazing on west and south facades dominates perimeter loads. Our load models use the actual facade specification and orientation, and perimeter zones are separated so a sunlit side does not overcool the shaded interior.
• District cooling versus own chiller plant: district cooling removes plant space and maintenance but involves connection and capacity charges, while own plant gives control but needs roof or basement space and an operations team.

Relevant Manolia projects

Frequently asked questions