MEP design and build in Dubai South 

MEP design and build in Dubai South: local context

Dubai South is a master-planned free zone around Al Maktoum International Airport, covering logistics, aviation, light industry, residential communities and staff accommodation. Development has accelerated since the 2010s, and large plots are still being built out. Logistics warehouses and labour accommodation are among the most common building types. Its scale means MEP packages are often repeated across several similar buildings, rewarding standardised details and well-planned testing sequences.

• Approvals typically run through Dubai South's own authority channel, with Civil Defence review of fire and life safety systems; requirements depend on plot and use.
• Large-span warehouses need roof ventilation, high-bay lighting, fire hydrants and sprinklers designed around racking heights and storage classes.
• The location is inland and exposed to dust and high temperatures, so air-cooled equipment must be derated and protected from sand ingress.

Building types we serve in Dubai South

For warehouses and logistics buildings, the work concentrates on high-bay sprinklers or in-rack protection, smoke venting, dock and office HVAC, and LV for racking, lighting and material handling.

Scope of work

• Concept review of the architectural design to locate plant rooms, risers, shafts and roof space early, before floor plates and ceiling heights are frozen.
• Cooling and heating load calculations, ventilation rates, electrical load schedules, water demand and drainage fixture-unit calculations for authority and utility submission.
• Selection of the HVAC approach, whether district cooling connection, central chilled water, VRF or packaged units, based on loads, plot constraints and lifecycle cost.
• Installation, testing, commissioning and handover by the same organisation, closing the loop between design assumptions and measured performance.

Systems we install

• Water supply, booster pumping, hot water, drainage and rainwater systems sized from fixture-unit calculations.
• Building management system, metering and controls integration across all mechanical and electrical plant.

UAE site and climate challenges

• UAE design ambient temperatures around 46°C dry bulb with high coastal humidity drive both sensible and latent loads. We design fresh-air systems to dehumidify outdoor air properly, because under-dehumidified ventilation is the main cause of mould and sweating ducts in UAE buildings.
• Solar gain through glazing on west and south facades dominates perimeter loads. Our load models use the actual facade specification and orientation, and perimeter zones are separated so a sunlit side does not overcool the shaded interior.
• VRF versus chilled water for mid-rise buildings: VRF suits phased occupancy and individual billing with no central plant, while chilled water scales better, runs quieter indoors and centralises maintenance in one plant room.

Relevant Manolia projects

Frequently asked questions