MEP design and build in Al Qusais 

MEP design and build in Al Qusais: local context

Al Qusais combines a long-established industrial area of warehouses, workshops and trading stores with residential mid-rise blocks, staff accommodation and schools, just north of Dubai International Airport and close to the Sharjah border. Much of the building stock dates from the 1980s–2000s and is being steadily refurbished or replaced plot by plot. It is a working district where trucks, buses and residents share the same streets.

• Staff accommodation blocks need generously sized domestic water storage, hot-water generation, drainage stacks and kitchen extract designed for high, simultaneous occupancy at shift changes.
• Proximity to the airport flight path can restrict crane and mobile-crane heights, so lifting of rooftop chillers and packaged units may need aviation-related permissions and planning.
• Change-of-use projects often trigger fire alarm, sprinkler and hydrant upgrades to meet the current UAE Fire & Life Safety Code before Civil Defence will sign off.

Building types we serve in Al Qusais

For warehouses and logistics buildings, the work concentrates on high-bay sprinklers or in-rack protection, smoke venting, dock and office HVAC, and LV for racking, lighting and material handling.

Scope of work

• Concept review of the architectural design to locate plant rooms, risers, shafts and roof space early, before floor plates and ceiling heights are frozen.
• Cooling and heating load calculations, ventilation rates, electrical load schedules, water demand and drainage fixture-unit calculations for authority and utility submission.
• Preparation of authority drawings for Civil Defence, DEWA, SEWA, ADDC or the relevant utility, and green-building compliance under Al Sa'fat or Estidama where applicable.
• Development of detailed design into coordinated shop drawings, with clash detection between ducts, pipes, cable trays and structure before procurement.

Systems we install

• LV electrical distribution from main panel to final circuits, lighting, small power and emergency supplies.
• Building management system, metering and controls integration across all mechanical and electrical plant.

UAE site and climate challenges

• UAE design ambient temperatures around 46°C dry bulb with high coastal humidity drive both sensible and latent loads. We design fresh-air systems to dehumidify outdoor air properly, because under-dehumidified ventilation is the main cause of mould and sweating ducts in UAE buildings.
• Air-cooled equipment loses capacity as condenser inlet air gets hotter, and roof plant often sees air several degrees above ambient. We derate selections for real roof conditions and space units to avoid hot-air recirculation.
• Design-and-build versus traditional consultant design: design-and-build shortens the programme and removes design-to-contractor gaps, but the client should keep an independent reviewer to check value and quality level.

Relevant Manolia projects

Frequently asked questions