MEP design and build in Al Nahda (Dubai) 

MEP design and build in Al Nahda (Dubai): local context

Al Nahda on the Dubai side sits right against the Sharjah border near Al Qusais, a residential district of mid- and high-rise apartment buildings, schools, clinics and neighbourhood retail built mostly since the 2000s. It is popular with families who split work and life between the two emirates, so buildings are dense, fully let and heavily used. Manolia completed the MEP works for a 2B+G+11 residential tower with gym in the area.

• Twin-basement towers on compact plots need car park jet-fan ventilation, CO detection, sump pits with duty/standby pumps and smoke clearance coordinated with sprinkler zoning, all squeezed between deep transfer beams.
• School buildings in the district benefit from fresh-air AHUs with dehumidification and CO2-based demand control, because classroom occupancy swings sharply across the day and the summer humidity load is high.
• Peak-hour traffic around the Dubai–Sharjah crossings is severe, so Manolia schedules concrete-pour-adjacent MEP works, deliveries and inspections outside the morning and evening rush.

Building types we serve in Al Nahda (Dubai)

For malls and retail centres, the work concentrates on large-volume air handling, tenant-ready chilled water or refrigerant capacity, smoke extraction for atriums and car parks and food-court exhaust.

Scope of work

• Concept review of the architectural design to locate plant rooms, risers, shafts and roof space early, before floor plates and ceiling heights are frozen.
• Cooling and heating load calculations, ventilation rates, electrical load schedules, water demand and drainage fixture-unit calculations for authority and utility submission.
• Selection of the HVAC approach, whether district cooling connection, central chilled water, VRF or packaged units, based on loads, plot constraints and lifecycle cost.
• Development of detailed design into coordinated shop drawings, with clash detection between ducts, pipes, cable trays and structure before procurement.

Systems we install

• Ventilation, kitchen and car park extract, smoke management and stair pressurisation systems.
• Building management system, metering and controls integration across all mechanical and electrical plant.

UAE site and climate challenges

• UAE design ambient temperatures around 46°C dry bulb with high coastal humidity drive both sensible and latent loads. We design fresh-air systems to dehumidify outdoor air properly, because under-dehumidified ventilation is the main cause of mould and sweating ducts in UAE buildings.
• Water supply in many areas relies on storage tanks that heat up in summer. We design tank locations, insulation and circulation to manage stored-water temperature and Legionella risk, and size cold-water storage to authority requirements.
• Water-cooled versus air-cooled chillers: water-cooled plant is more efficient in UAE heat but needs cooling towers, water treatment and make-up water; air-cooled is simpler and usual for mid-size buildings without water allowances.

Relevant Manolia projects

Frequently asked questions