Chiller installation in Jumeirah Village Circle (JVC) 

Chiller installation in Jumeirah Village Circle (JVC): local context

Jumeirah Village Circle is a large community of mid-rise apartment buildings, townhouses and villas between Al Khail Road and Hessa Street, developed in phases since the late 2000s. It has become one of Dubai's busiest areas for mid-market residential construction, with many G+4 to G+20 buildings on individual plots. Construction is still active, so new builds sit next to occupied buildings and narrow internal roads.

• Approvals can involve the master developer and Trakhees or Dubai Municipality depending on the plot, with Civil Defence review of fire systems; the route is confirmed per plot.
• Air-cooled chillers or VRF systems on rooftops face high roof temperatures, so selections are derated for summer conditions and placed with enough clearance to avoid hot-air recirculation.
• Narrow circular roads and neighbouring active sites limit crane and delivery positions, so material drops are coordinated with surrounding contractors.

Building types we serve in Jumeirah Village Circle (JVC)

For high-rise towers, the work concentrates on pressure-zoned water and drainage stacks, riser and plant-room coordination, stair pressurisation and a cooling source sized for diversity across dozens of typical floors.

Scope of work

• Review of plant capacity, redundancy and part-load profile so the number and size of chillers matches how the building actually operates through the year.
• Structural and acoustic coordination for roof or plant-room locations, including spring isolators, inertia bases and maintenance clearances around each machine.
• Plant manager and BMS integration for sequencing, staging and alarm reporting, followed by manufacturer start-up and performance verification.
• Refrigerant leak detection and plant-room ventilation where water-cooled machines sit indoors, wired to alarm and to start the emergency extract fans.

Systems we install

• Air-cooled screw or scroll chillers selected for high ambient
• Chemical dosing and side-stream filtration on the chilled-water loop

UAE site and climate challenges

• Dust and sand clog condenser coils and reduce heat rejection, so coil cleaning access, coatings for coastal sites and a planned cleaning regime are built into the handover.
• Roof plant on towers is often installed months before handover and left idle in the sun, so chillers are protected, crankcase heaters energised when power arrives, and controls checked for heat damage before manufacturer start-up.
• Number of chillers: two or three smaller machines give redundancy and better part-load efficiency, while one large chiller lowers first cost but leaves no cooling during breakdowns.

Relevant Manolia projects

2B+G+15+Gym

2B+G+15 residential tower, IMPZ

Dubai Production City (formerly IMPZ) · MEP · Completed

Full MEP package for a two-basement residential tower with gym.

Hassani Group factories & HQ, DIP

Dubai Investments Park (DIP) · MEP · Completed

Factory complex, HQ and staff accommodation, all served from one central cooling station.

Frequently asked questions