MEP design and build in Ajman City 

MEP design and build in Ajman City: local context

Ajman City covers the emirate's compact urban core along the corniche and inland districts, with residential high-rises, mid-rise apartment blocks, beach hotels and retail, much of it built since the 2000s at more affordable price points than neighbouring Sharjah and Dubai. Manolia's work in Ajman includes HVAC works for a G+6 residential building. Hotels along the beachfront add hospitality work to the mix.

• Mid-rise residential buildings typically use VRF, ducted split or air-cooled chiller systems, sized and derated for summer conditions on tight roofs.
• Etihad WE handles power and water connections, and Civil Defence (Ministry of Interior) approves fire systems, so details differ from Dubai practice.
• Sites are 30–60 minutes from Dubai, so deliveries and manpower movements are planned around traffic through Sharjah.

Building types we serve in Ajman City

For mid-rise residential and mixed-use buildings, the work concentrates on compact plant on the roof, car-park ventilation in podiums, metered apartment DBs and tight ceiling voids that make coordination drawings decisive.

Scope of work

• Cooling and heating load calculations, ventilation rates, electrical load schedules, water demand and drainage fixture-unit calculations for authority and utility submission.
• Selection of the HVAC approach, whether district cooling connection, central chilled water, VRF or packaged units, based on loads, plot constraints and lifecycle cost.
• Preparation of authority drawings for Civil Defence, DEWA, SEWA, ADDC or the relevant utility, and green-building compliance under Al Sa'fat or Estidama where applicable.
• Installation, testing, commissioning and handover by the same organisation, closing the loop between design assumptions and measured performance.

Systems we install

• LV electrical distribution from main panel to final circuits, lighting, small power and emergency supplies.
• Fire sprinklers, hydrants, hose reels and addressable fire alarm systems.

UAE site and climate challenges

• Air-cooled equipment loses capacity as condenser inlet air gets hotter, and roof plant often sees air several degrees above ambient. We derate selections for real roof conditions and space units to avoid hot-air recirculation.
• Solar gain through glazing on west and south facades dominates perimeter loads. Our load models use the actual facade specification and orientation, and perimeter zones are separated so a sunlit side does not overcool the shaded interior.
• District cooling versus own chiller plant: district cooling removes plant space and maintenance but involves connection and capacity charges, while own plant gives control but needs roof or basement space and an operations team.

Relevant Manolia projects

Frequently asked questions